<mark id="6ko6q"><output id="6ko6q"></output></mark>
    1. <track id="6ko6q"><em id="6ko6q"><del id="6ko6q"></del></em></track>

      <acronym id="6ko6q"></acronym>

      Shenzhen three and wave of Electrical and Mechanical Technology Co., Ltd

      400 0061 1152CN
      Atmospheric Pressure
      • PL-BM45 double-head fixed pipeline plasma surface treatment machine

      PL-BM45 double-head fixed pipeline plasma surface treatment machine

      Category:Atmospheric Pressure

      Introduction: PL-BM45 double-head fixed pipeline plasma surface treatment machine

      Service Hotline:400 0061 1152

      Buy NowOnline consultation

      • Features
      • Application


      Manufacturer: Sanwa Poda

      Model: PL-BM45

      Power supply voltage: 220 ( ± 10% ) VAC, 50 / 60Hz

      Power input fuse: 10A/250V

      Processing area: Segmentable optional: 30-35mm/45-50mm optional

      Operating frequency: 18KHz ~ 60KHz

      Working high pressure: 2KV ~ 7KV

      Maximum practical output power: 600-1000W (continuously adjustable) test field is more extensive

      Maximum power consumption: ≤1100W

      Working pressure range: 0.05MPa0.4MPa (0.5Kg4Kg)

      Gas source requirements: 0.3MPa1.0Mpa (3Kg10Kg), no oil and no water

      Host volume: length, width and height 437*140*350mm

      Output cable length: Net length ≥ 2500mm, can be customized

      Nozzle volume: MAX 280*79*79mm

      Application field

      1 Ignition coil With the development of the automotive industry, its performance requirements in all aspects are getting higher and higher. The ignition coil has lifting power, the most obvious effect is to improve the medium and low speed torque during driving; eliminate carbon deposit, better protect the engine, extend the life of the engine; reduce or eliminate the resonance of the engine; fully burn the fuel, reduce emissions, etc. Features. In order to make the ignition coil fully play its role, its quality, reliability, service life and other requirements must meet the standard, but the current ignition coil production process still has a big problem - after the epoxy coil is cast outside the epoxy coil, due to The skeleton contains a large amount of volatile oil on the front surface of the mold, which causes the bond between the skeleton and the epoxy bond surface to be unreliable. In the finished product, the ignition temperature rises, and bubbles are generated in the small gap of the joint surface, and the ignition coil is damaged. Serious explosions can also occur. After the plasma treatment of the ignition coil skeleton, not only the non-volatile oil stain on the surface can be removed, but also the surface activity of the skeleton can be greatly improved, that is, the adhesion strength between the skeleton and the epoxy resin can be improved, bubbles can be avoided, and the enameled wire after winding can be improved. Welding strength with the skeleton contacts. In this way, the performance of the ignition coil in various aspects of the production process is significantly improved, improving reliability and service life.

      2 Engine oil seal The engine crankshaft oil seal prevents engine oil from leaking from the engine and prevents foreign matter from entering the engine. The crankshaft oil seal is one of the parts of the engine and is in contact with the oil at a high temperature, so it is necessary to use a material excellent in heat resistance and oil resistance. At present, high-grade cars generally use PTFE materials. With the continuous improvement of automotive performance requirements, more and more manufacturers have gradually used this material, and its application prospects are very broad. PTFE material has excellent performance in all aspects, high temperature resistance, corrosion resistance, non-stick, self-lubricating, excellent dielectric properties, low coefficient of friction, but untreated PTFE material has poor surface activity, one end and metal The bonding between the two is very difficult and the product cannot meet the quality requirements. In order to solve this technical problem, it is necessary to change the surface properties of PTFE (polytetrafluoroethylene) and metal bonding, without affecting the performance of the other side. Although the treatment with the sodium solution in the industry can improve the bonding effect to a certain extent, it changes the performance of the original PTFE. It has been proved by experiments that after the surface of the PTFE to be bonded is bombarded with plasma, the surface activity is obviously enhanced, the bonding with the metal is firm and reliable, and the requirements of the process are satisfied, while the other side maintains the original performance, and its application is also More and more widely recognized.

      3 Other applications in the automotive industry With the development of the economy, consumers are increasingly demanding the performance of automobiles, such as the appearance of the car, the reliability of operation comfort, and the durability of use. In order to meet the requirements of consumers, all car manufacturers pay more attention to the optimization and improvement of details when producing cars, such as

      (1) The instrument panel is treated before flexible polyurethane (PU) coating

       (2) Control panel is processed before bonding

      (3) Pre-planting of internal PP parts

      (4) Treatment of automobile door and window seals

      In the past, the coating effect of the instrument panel or the control panel was very poor, it was not wear-resistant, and it was easy to fall off the paint. The chemical treatment can change the coating effect, but it also changes the performance of the substrate such as the instrument panel. , so that its strength is reduced. At present, many manufacturers have used plasma technology to treat these substrates. By plasma bombardment, the microscopic activity of the surface of the material is enhanced, and the coating effect can be significantly improved. According to the experiment, it is necessary to use different process parameters to treat different materials with plasma cleaning machine to achieve better activation effect.


      Flexible circuit board bonded pretreatment plasma cleaner

      Fiber optic transmission chip binding enhanced plasma cleaning machine

      Glass terminal surface activated plasma cleaning machine

      Flexible packaging sealing pretreatment plasma cleaning machine

      Precision packaging film pretreatment plasma cleaning machine

      PP/EPDM car bumper spray pretreatment plasma cleaner

      Automobile headlight PP base groove bonding pre-treatment plasma cleaning machine

      Mobile phone camera IR and HOLDER adhesion enhanced plasma cleaning machine

      Mobile phone case ink adhesion enhanced plasma cleaning machine

      Mobile phone motherboard binding enhanced plasma processor

      BGA, CSP and other plastic packaging and lead frame surface cleaning machine

      Optical lens activated plasma cleaner


      Related Products

      Order:PL-BM45 double-head fixed pipeline plasma surface treatment machine

      • Contact
      • Cellphone
      • Emai
      • Code